|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
v01.0503 MICROWAVE CORPORATION HMC435MS8G SPDT NON-REFLECTIVE SWITCH, DC - 4.0 GHz Features High Isolation: 60 dB @ 1 GHz 50 dB @ 2 GHz Positive Control: 0/+5V 51 dBm Input IP3 Non-Reflective Design MS8G SMT Package, 14.8 mm2 Typical Applications The HMC435MS8G is ideal for: * Basestation Infrastructure * MMDS & 3.5 GHz WLL * CATV/CMTS * Test Instrumentation Functional Diagram General Description The HMC435MS8G is a non-reflective DC to 4 GHz GaAs MESFET SPDT switch in a low cost 8 lead MSOP8G surface mount package with an exposed ground paddle. The switch is ideal for cellular/PCS/3G basestation applications yielding 50 to 60 dB isolation, low 0.8 dB insertion loss and +50 dBm input IP3. Power handling is excellent up through the 3.5 GHz WLL band with the switch offering a P1dB compression point of +31 dBm. On-chip circuitry allows positive voltage control of 0/+5 Volts at very low DC currents. 14 SWITCHES - SMT Electrical Specifications, TA = +25 C, Vctl = 0/+5 Vdc, 50 Ohm System Parameter Frequency DC - 2.5 GHz DC - 3.6 GHz DC - 4.0 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 3.6 GHz DC - 4.0 GHz DC - 2.5 GHz DC - 3.6 GHz DC - 4.0 GHz 0.5 - 4.0 GHz 0.5 - 4.0 GHz 0.5 - 1.0 GHz 0.5 - 2.5 GHz 0.5 - 4.0 GHz DC - 4.0 GHz tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 40 60 ns ns 56 46 43 37 30 15 13 11 16 27 48 45 41 Min. Typ. 0.8 1.2 1.5 60 50 47 41 35 20 17 15 21 31 51 48 45 Max. 1.0 1.5 1.8 Units dB dB dB dB dB dB dB dB dB dB dB dB dBm Insertion Loss Isolation (RFC to RF1/RF2) Return Loss (On State) Return Loss (Off State) Input Power for 1 dB Compression Input Third Order Intercept (Two-Tone Input Power = +7 dBm Each Tone) Switching Speed dBm 14 - 230 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v01.0503 MICROWAVE CORPORATION HMC435MS8G SPDT NON-REFLECTIVE SWITCH, DC - 4.0 GHz GaAs MMIC Insertion Loss 0 -1 SUB-HARMONICALLY Return LossMIXER 17 - 25 GHz PUMPED 0 -5 INSERTION LOSS (dB) RETURN LOSS (dB) -10 -15 -20 -25 -30 RFC RF1, RF2 OFF RF1, RF2 ON -2 -3 + 25C + 85C - 40C -4 -5 0 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) 0 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) Isolation Between Ports RFC and RF1 / RF2 0 -10 -20 -30 -40 -50 -60 -70 0 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) RF1 RF2 Isolation Between Ports RF1 and RF2 0 -10 -20 -30 -40 -50 -60 -70 0 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) RFC - RF1 ON RFC - RF2 ON 14 SWITCHES - SMT 14 - 231 ISOLATION (dB) 0.1 and 1 dB Input Compression Point 35 Input Third Order Intercept Point 60 58 +25 C +85 C -40 C INPUT COMPRESSION (dBm) ISOLATION (dB) INPUT IP3 (dBm) 3.5 4 1 dB Compression Point 0.1 dB Compression Point 56 30 54 52 50 48 46 44 42 15 0 0.5 1 1.5 2 2.5 3 FREQUENCY (GHz) 40 0 0.5 1 1.5 2 2.5 3 25 20 3.5 4 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v01.0503 MICROWAVE CORPORATION HMC435MS8G SPDT NON-REFLECTIVE SWITCH, DC - 4.0 GHz Absolute Maximum Ratings Control Voltage Range Storage Temperature Operating Temperature RF Input Power Vctl = 0/+5V -0.5 to +7.5 Vdc -65 to +150 C -40 to +85 C +31 dBm Truth Table Control Input A Low High B High Low Signal Path State RFC to: RF1 RF2 Control Voltages *Control Input Tolerances are 0.2 Vdc State Low High Bias Condition* 0 Vdc @ 25 A Typical +5 Vdc @ 25 A Typical DC blocks are required at ports RFC, RF1, RF2. Do not operate continuously at RF power input greater than 1 dB compression and do not "Hot Switch" power levels greater than +24 dBm (control = 0/+5 Vdc). 14 SWITCHES - SMT Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEADFRAME MATERIAL: COPPER ALLOY 3. LEADFRAME PLATING: Sn/Pb SOLDER 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 14 - 232 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v01.0503 MICROWAVE CORPORATION HMC435MS8G SPDT NON-REFLECTIVE SWITCH, DC - 4.0 GHz Pin Descriptions Pin Number Function Description Interface Schematic 1 A See truth and control voltage tables. 2 B See truth and control voltage tables. 3, 5, 8 RFC, RF1, RF2 These pins are DC coupled and matched to 50 Ohms. Blocking capacitors are required. 4 N/C Not Connected 6, 7 GND Package bottom has exposed metal paddle that must be connected to PCB RF ground as well. 14 SWITCHES - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 14 - 233 v01.0503 MICROWAVE CORPORATION HMC435MS8G SPDT NON-REFLECTIVE SWITCH, DC - 4.0 GHz Evaluation PCB 14 SWITCHES - SMT List of Material Item J1 - J3 J4 - J7 C1 - C3 R1 - R2 U1 PCB* Description PC Mount SMA RF Connector DC Pin 100 pF Capacitor, 0402 Pkg. 100 Ohm Resistor, 0402 Pkg. HMC435MS8G SPDT Switch 104122 Evaluation PCB The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and backside ground slug should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. * Circuit Board Material: Rogers 4350 Note: Pin J6 is unused and need not be connected. 14 - 234 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v01.0503 MICROWAVE CORPORATION HMC435MS8G SPDT NON-REFLECTIVE SWITCH, DC - 4.0 GHz Notes: 14 SWITCHES - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 14 - 235 |
Price & Availability of HMC435MS8G |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |